612 Alfa ETICS-Adhesive Foam (B1)

Easy to handle B1-Adhesive Foam

Alfa ETICS-Adhesive Foam (B1) is a flame-retardant polyurethane foam. It is made for the fixation (PUR-Adhesive) of insulation boards to the brickwork, facade, cellar ceilings as well as on flat roofs.
The really good thermal insulation value of 0,029 W/(mk) ensures that Alfa ETICS-Adhesive Foam acts as a second insulating layer between insulation board and the house wall so that the insulation can be applied free of heat bridges (no cold bridges).
Alfa ETICS-Adhesive has very good adhesion properties for the bonding of Styrodur, Styrofoam, rock wool, etc. onto stable surfaces like wood, concrete, aerated concrete, stone, brick, metal and different plastics.
At the facade insulation the first row of insulation boards must be supported with fixing brackets. The low material consumption enables an efficient work. After the insulation work your house wastes less energy and your heating gives less pollutants to the environment. The living climate will enhance because insulated exterior walls prevent at cold temperatures the formation of condensation on the walls - this prevents from mould and increases the value of your property.
Also suitable for the bonding onto ceilings (e.g. cellar ceiling, storey ceiling). Heavy insulation boards might have to be supported additionaly with a dowel (centric).
Note: For processing a foam-gun is necessary.
Processing temperature: from +5°C

Advantages:

• thermal insulation value 0,029 W/(mK)
• excellent acoustic insulation
• very low expansion
• high dimensional stability
• very good adhesion properties
• volume yield 43-47 l (foamed)
• volume yield enough for approx. 8-12 m2
• fire classification B1 (DIN4102 T1)
• tested by IFBT GmbH Leipzig
• tack-free after approx. 10-15 min
• cutable after approx. 20-25 min
• curing time approx. 1,5-5 h
• temperature resistance -40 up to +90°C
• waterproof and chemical resistant
• tested by IFBT-Leipzig
• free of CFC (FCKW), PCB and PCP