612 Alfa ETICS-Adhesive Foam
Easy to handle Adhesive Foam for the mounting and bonding of ETICS (external thermal insulation composite system) insulation boards (e.g. Styrodur, Styrofoam, Polystyrene, rock wool). Due to the fast curing time, further processing is possible after only 3 hours.
Easy to handle Adhesive Foam
Alfa ETICS-Adhesive Foam is a polyurethane foam (PUR-Adhesive) that is made for the fixation of insulation boards to brickwork, facade, cellar ceilings as well as on flat roofs.
The excellent thermal insulation value of 0,029 W/(mk) ensures that Alfa ETICS-Adhesive Foam acts as a second insulating layer between insulation board and the house wall so that the insulation can be applied free of heat bridges (no cold bridges).
Alfa ETICS-Adhesive has very good adhesion properties for the bonding of Styrodur, Styrofoam, rock wool, etc. onto stable surfaces like wood, concrete, aerated concrete, stone, brick, metal and different plastics.
For the insulation of facades the first row of insulation boards must be supported with fixing brackets. The low material consumption allows you to work efficiently. After the insulation work your house wastes less energy and your heating emits less pollutants into the environment. The living climate will improve because insulated exterior walls prevent the formation of condensation water on the walls when temperatures are cold - this prevents mould and increases the value of your property.
Also suitable for the bonding onto ceilings (e.g. cellar ceiling, storey ceiling). Heavy insulation boards might have to be supported additionaly with a dowel (centric).
Note: For processing a foam-gun is necessary.
Processing temperature: from +5°C
Tip: If you have gaps between your insulations boards, use the grey 633 Alfa ETICS Filling Foam to fill them quickly and easily.
- Thermal insulation value 0,029 W/(mK)
- Excellent acoustic insulation
- Very low expansion
- High dimensional stability
- Very good adhesion properties
- Volume yield 43-47 l (foamed)
- Volume yield enough for approx. 8-12 m²
- Tested by IFBT GmbH Leipzig
- Tack-free after approx. 5-10 min
- Cutable after approx. 20-25 min
- Curing time approx. 1,5-5 h
- Temperature resistance -40 up to +90°C
- Waterproof and chemical resistant
- Tested by IFBT-Leipzig
- Free of CFC (FCKW), PCB and PCP